ALTERNATIVE DESIGN OF GUESTWING BUILDING 1 THE RITZ CARLTON HOTTEL WITH DUAL SYSTEM
Abstract
When planning a tall building structure, the deviation due to lateral forces is very important to be taken into account in the planning of tall building structures. To reduce the amount of deviation in the structure adding by special structural elements, as shear walls. With the shear wall, can increase the stiffness of the building structure and absorb large shear forces along with higher the building structure and lateral force on structure will not fully accepted by frame structure which will result a decrease in deviation. Guestwing 1 The Ritz Carlton Hottel located in South Kuta District, Badung Regency, Bali. This building has a height of 20.2 m consisting of 6 floors. Planning with 2 models: a) SRPMK Existing Modeling, b) Dual System Model. Material specifications and loading are the same, just different in addition of shear walls and reducing the dimensions the building. Based on the results the analysis of the two models, the largest inter-storey deviation value in the existing model X=52.014mm; Y=47.960mm and for the dual system model X=25.614mm; Y=26.026mm. From the results of deviation analysis on both models, can be concluded that with addition of shear walls, there is a decrease in deviation 63.27% in X direction and 68.18% in Y direction. The most significant decrease occurs in dimensions and reinforcement of column K1 from size 350x800mm with 22 D22 reinforcement to column 300x600mm with 18 D22 reinforcement, beam B3 250x450mm for support area 17 D13 and field area 10 D13 to beam 250x400mm with the number of support reinforcement 11 D13, and the number of field reinforcement 7 D13. From the results of this planning can be used as a consideration for the construction of the next building for the use of shear walls in the structure.
References
Andalas, G., Suyadi, & Husni, H. R. (2016). Analisis Layout Shearwall terhadap Perilaku Struktur Gedung. Jurnal Rekayasa Sipil dan Desain (JRSDD), 1(1), 491–502.
Andreasnata, I. W. M., Sinarta, I. N., Armaeni, N. K., & Sarassantika, I. P. E. (2022). Column structure strengthening with FRP (Fiber Reinforced Polymer) due to story addition. Journal of Infrastrcuture Planning and Engfineering, 1(1), 38–45.
ATKINS. (t.t.). Manual for Analysis & Design Using ETABS.
Baker, W. F., Korista, D. S., & Novak, L. C. (2008). Engineering the World ’ s Tallest – Burj Dubai. March, 3–5.
Batu, M. L., Dapas, S. O., & Wallah, S. E. (2016). Efisiensi Penggunaan Dinding Geser Untuk Mereduksi Efek Torsi pada Bangunan yang Tidak Beraturan. Jurnal Sipil Statik, 4(1), 29–35.
BSN. (2019). Penerapan Standar Nasional Indonesia.
Computer and Structures.Inc (CSI). (2013). ETABS. Computer and Structures, Inc (CSI).
Fadilah, A. (2019). Pengaruh Variasi Tata Letak Dinding Geser Pada Bangunan Beton Bertulang dengan Analisa Pushover pada Gedung Kampus Uinsu Medan.
Gegiranang, I. G., & Sudarsana, I. K. (2019). Analisis Pengaruh Bentuk Dinding Geser Beton Bertulang Terhadap Kapasitas dan Luas Tulangan. Jurnal Spektran, 7(2), 187–194. https://doi.org/10.1093/acref/9780195301731.013.41778
Gusra, M. H., Haris, S., & Kurniawan, R. (2023). Pengaruh Posisi Dinding Geser Terhadap Kinerja Struktur Gedung Tak Beraturan Akibat Beban Gempa. Cived, 10(2), 639–647.
Han, Q., Wang, D., Zhang, Y., Tao, W., & Zhu, Y. (2020). Experimental investigation and simplified stiffness degradation model of precast concrete shear wall with steel connectors. Engineering Structures, 220. https://doi.org/10.1016/j.engstruct.2020.110943
Li, J., Wang, Y., Lu, Z., & Li, J. (2017). Experimental study and numerical simulation of a laminated reinforced concrete shear wall with a vertical seam. Applied Sciences (Switzerland), 7(6). https://doi.org/10.3390/app7060629
Pradesh, A. (2016). ANALYSIS OF A STEEL FRAMED BUILDING WITH AND WITHOUT. 4(12), 86–95.
Sarassantika, I. P. Ellsa, & Putra, I. B. G. P. (2020). The Importance of Awareness of Heritage Building’s Seismic Behaviors : Specific on Pagoda-Type Structure. Journal of Infrastructure & Facility Asset Management, 2(1). https://doi.org/10.12962/jifam.v2i1.6903
Sarassantika, I Putu Ellsa, & Hsu, H. L. (2023). Upgrading framed structure seismic performance using steel Lever-Armed dampers in the Braces. Engineering Structures, 280(January), 115683. https://doi.org/10.1016/j.engstruct.2023.115683
Sarassantika, I. Putu Ellsa, Sulistiana, P. D., Sanjaya, I. G. D. P., Hartawan, I. M. N., Tejadinata, I. G. N. A. E. A., & Suwandi, K. Y. P. (2023). Seismic Performance Analysis of Meru (Bali Pagoda): Preliminary Study. E3S Web of Conferences, 445. https://doi.org/10.1051/e3sconf/202344501014
Setiawan. (2016). Perancangan Struktur Beton Bertulang Berdasarkan SNI 2847:2013. Erlangga, Jakarta.
Simbolon, S. C. R., Tampubolon, S. P., & Mulyani, A. S. (2023). PERFORMANCE ANALYSIS OF HORIZONTAL IRREGULAR BUILDINGS BASED ON RESPONS SPEKCTRUM AND TIME HISTORY METHODE. Jurnal PenSil, 12(3). https://doi.org/10.21009/jpensil.v12i3.37850
SNI 1727, 2020. (2020). Beban desain minimum dan Kriteria terkait untuk bangunan gedung dan struktur lain 1727:2020. Badan Standarisasi Nasional 1727:2020, 8, 1–336.
Takewaki, I. (2017). Response-Controlled System with Shear Wall and Concentrated Dampers in Lower Stories. 3(October). https://doi.org/10.3389/fbuil.2017.00057
Tampubolon, S. (2021). Analisis Kekuatan Geser Pada Hubungan Balok-Kolom Interior Beton Bertulang. JOURNAL OF CIVIL ENGINEERING BUILDING AND TRANSPORTATION. https://doi.org/10.31289/jcebt.v5i1.3731
Tampubolon, S. P. (2023). Bond Stress-Slip Effect for Simulation and Experiment Test of Reinforced Concrete Beam on the Pushover Behavior. AIP Conference Proceedings, 2689(1). https://doi.org/10.1063/5.0120808
Tampubolon, S. P., Sarassantika, I. P. E., & Suarjana, I. W. G. (2022). Analisis Kerusakan Struktur Bangunan dan Manajemen Bencana Akibat Gempa Bumi, Tsunami, dan Likuifaksi di Palu. Bentang : Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil, 10(2), 169–186. https://doi.org/10.33558/bentang.v10i2.3263
Tampubolon, S. P., Wang, C. Y., & Wang, R. Z. (2020). Numerical simulations of the bond stress-slip effect of reinforced concrete on the push over behavior of interior beam-column joint. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/725/1/012028
Tampubolon, S. P., Wang, C., & Zuowang, R.-. (2018). Numerical Simulations of the Bond Stress-Slip Effect of Reinforced Concrete on the Pushover Behavior of Wall. International Journal of Modern Research in Engineering and Technology, 3(11).
- View 1 times Download 1 times Requires Subscription Paper 2
Copyright (c) 2024 Anggi Prasetya I Made, I Putu Ellsa Sarassantika, Cokorda Agung Yujana, I Wayan Gde Erick Triswandan, I Putu Deny Surastika Aditama
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hak Cipta atas Tulisan Karya Ilmiah
Bersama dengan ini saya sebagai penulis utama menyatakan bahwa paper yang saya kirimkan untuk dipublikasikan melalu Jurnal Rekayasa Teknik Sipil dan Lingkungan adalah benar merupakan hasil orisinil Tulisan Karya Ilmiah yang merupakan hasil penelitian/kajian yang saya lakukan dan belum pernah dipublikasikan pada penerbit Jurnal ilmiah lain di Indonesia.
Jika di kemudian hari ternyata ditemukan bukti adanya hal-hal yang tidak sesuai dari pernyataan diatas maka saya bersedia menerima konsekuensi yang diberikan oleh Dewan Redaksi Jurnal Rekayasa Teknik Sipil dan Lingkungan serta paper yang telah diterbitkan akan DIBATALKAN dan dinyatakan sebagai hasil karya PLAGIASI.
